Product specifications

AUTION: Before performing any
ice and adjustments:
31ease control bar and stop engine.
ake sure the blade and all moving
=ds have completely stopped.
_connect spark plug wire from spark
_g and place where it cannot come in
,ntact with plug.
/NMOWER
_JUST CUTTING HEIGHT
1"O ADJUST CU'I-I'ING HEIGHT" inthe
ation section of this manual.
R DEFLECTOR
rear deflector,attached between the rear
ds of your lawn mower, is provided to
nize the possibilitythat objects will be
Jnout the rear of the lawn mower into the
_tots mowing position. If the rear
_or becomes damaged, it should be
ced.
kDJUST HANDLE
handle can be mounted in a high or
)osition. The mounting holes in the
,m of lower handle are off center for
Ig or lowering the handle.
,move upper handle and all parts
ached to lower handle.
_move hairpin cotters from lower
ndle bracket mounting pin.
ueeze lower handle in to remove it
m mounting pins.
m lower handle over to raise or lower
ndle.
ueeze lower handle in and position
les onto mounting pins on handle
lcket.
.assemble upper handle and all parts
lOVed from lower handle.
ng ,., Mowing .,
:)n F-_ position ,(-?'
L; m,./ _:
w position High position
\
Lower
handle
Rotate
ENGINE SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury. If you
believe that the engine is running too fast
or too slow, take your lawn mower to an
authorized service center for repair and
adjustment.
CARBURETOR
Your carburetor has a non-adjustable
fixed main jet for mixture control. If your
engine does not operate properly due to
suspected carburetor problems, take your
lawn mower to an authorized service
center for repair and/or adjustment.
IMPORTANT: never tamper with the
engine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed
setting can be dangerous, if you think the
engine-govemed high speed needs
adjusting, contact your nearest authorzed
servmcecenter, which has proper
equipment and experience to make any
necessary adjustments.
12