- Instruction Manual J€:RAFTSMA#°J LAWN EDGER ATTACHMENT Model No. C944.511573 • • Safety Assembly • • Operation Maintenance • Parts List WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. Sears Canada, 545001422 2/14/05 Inc. 
- Warranty Statement Identification of Symbols Safety Rules Assembly Operation 2 2 2 6 7 Maintenance Service & Adjustments Storage Parts List Parts and Ordering 9 10 10 Center Section Back Cover LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN ® LAWN EDGER ATTACHMENT For two (2) years from tile date of purchase, Sears Canada, Inc., will repair or replace free of charge, at Sears option, parts which are defective as a result of material or workmanship. 
- stopped andspark plugwireisdiscon- ELECTRICAL SAFETY (for electric nected (orpowerhead isdisconnectedpowerheads) frompower source) whenremoving '_&WARNING: Avoid a dangerous jammed material fromthecutting blade. Donotgraborholdattachment environment. To reduce the risk of electrical shock, do not use in rain, in damp bythecutting blade. • Dress properly. Always wear safety or wet locations, or around swimming glasses orsimilar eyeprotection when pools, hot tubs, etc. 
- extension cordtotheunit. Anunder- UNIT/MAINTENANCE SAFETY sized extension cordwillcause a Disconnect powerdropinlinevoltage resulting inloss '_WARNING: head spark plug (or disconnect powerofpower andoverheating. Ifin doubt, usethenextheavier gauge. head from power source) before performing maintenance. Thelower thegauge number, the heavier thecord. • Inspect entire unit before each use. • Donotusemultiple cords. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are • Donotabuse cord. 
- & Safety Glasses t Boots WARNING: Blades can throw objects violently. • You can be blinded or injured. • Wear safety glasses and boots. _, WARNING: Hazard zone for thrown objects • Blades can throw objects violently. • Others can be blinded or injured. • Keep people and animals 50 feet (15 m) away. 
- STANDARDS: This edger attachment is Listed by Underwriter's Laboratories, Inc., in accordance with U L Standard 1602, "Gasoline- Engine- Powered, RigidCutting-Member Edgers and Edger Trimmers," only when used with the following models: 25cc Powerhead (with trimmer attachment) CARTON CONTENTS Check carton contents against the following list. Model C944.511573 • Edger attachment • Handlebar • Handlebar mounting bracket for 1" (2.5 cm) shaft • Handlebar mounting bracket for 7/8" (2. 
- KNOW YOUR EDGER ATTACHMENT READ THiS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR EDGER ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Depth Adjustment Hanger Knob i Shaft J Blade Shield Wheel Gearbox BLADE The BLADE is designed to cut sod. 
- INSTALLING ATTACHMENT 1. Remove the shaft cap from the attachment (if present) and discard. 2. Position locking/release button of attachment into guide recess of upper shaft coupler. Coupler Primary Hole Guide Recess Upper Shaft Locking/ Release Button Attachment 3. Push the attachment into the coupler until the locking/release button snaps into the primary hole. 4. Before using the unit, tighten the knob securely by turning clockwise. 
- 1, Loosen the depth adjustment knob. 2. Slide the wheel to the desired position. • Raising the wheel will increase the cutting depth, • Lowering the wheel will decrease the cutting depth. 3. Tighten the depth adjustment knob securely. Depth Knob MAINTENANCE ,_ SCHEDULE WARNING: Always stop unit and disconnect spark plug wire (or disconnect powerhead from power source) before performing maintenance. 
- BLADE REPLACEMENT _,WARNING: The blade will con- tinue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the blade. ,I_WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. The blade is sharp and can cut you even when it is not moving. 1.