Owners manual

Critical: When installing corners,

flex corner hinges back and forth

several times. This will help provide

a square corner and ensure proper

fit of remaining panels.

Important: DO NOT flex in reverse

position, as this can crack the panel.

SHED ASSEMBLY – WALLS

Align tab on bottom right side of left front corner (D)

with slot on ﬂoor (S). Lower panel into slot and lock in

place by sliding panel toward door opening. Note: Use

a rubber mallet to “push” left front corner (D) into

locked position.

Tip left front corner (D) outward slightly and bend the

corner hinge.