Owners manual

Shed Assembly – Walls/Continued

Align tabs on bottom of back panel (G) with slots along

ﬂoor. Lower back panel into slots and lock in place by

sliding panel toward corner. Note: To allow back panel

to overlap left back corner, tilt out slightly as you slide it

into position. Note: Use a rubber mallet to “push” back

panel (G) into locked position, aligned with left back

corner.

Secure panels with four easy bolts (R). Work from ﬂoor

to roof. DO NOT use torque wrench. Use easy bolt easy

driver and hand tighten. Easy bolt head will be ﬂush

when fully seated. DO NOT over tighten easy bolts.

Note: You may hear a click when easy bolt has been

tightened completely.