Owners manual

2
• Consult your local authorities for any permits
required to construct shed.
Prior to the construction of your shed, check
with the local building code official to review any
required permits or building limitations.
• A level and sturdy foundation is required before
shed construction can begin.
Site preparation information is available on
pages 14-17. A foundation that differs from the
suggestions within this manual could prevent
proper assembly and may damage parts.
• Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if
assembled incorrectly or in the wrong sequence.
• Please follow instructions.
Manufacturer is not responsible for replacing
parts lost or damaged due to incorrect assembly.
• Check for all parts before you begin assembly.
Using the provided parts check list on pages
5-13, verify that you have all the parts required to
construct your shed model.
COMPLETE SITE PREPARATION AND
FOUNDATION CONSTRUCTION BEFORE
UNPACKING ALL PARTS.
• Assistance is required during entire assembly.
• Use a rubber mallet to “push” parts into locked
position.
• Proper site preparation required.
• Shed not intended for use in extreme weather
conditions.
• Shed not intended for storage of flammable or
caustic chemicals.
• Store heavy items near the bottom of shed.
• Shed not intended for use by children.
• DO NOT stand, sit, or store items on storage
shed roof.
• Treat carefully in extreme temperatures.
• Repair or replace broken parts immediately.
• Manufacturer is not responsible for damage
caused by weather or misuse.
• At regular intervals inspect your shed to make
sure that assembly integrity has been
maintained.
• Periodically check that the location you have
chosen to set your shed is still level.
• This kit contains parts with metal edges. Please
be careful when handling.
CAUTION
BEFORE YOU BEGIN...