Owners manual

23
1
2
18
E
A
1
22
19
E
17
Align tab on bottom of left front corner (E) with slot on left
floor (A). Lower panel into slot and lock in place by sliding
panel toward door opening.
Note: Use a rubber mallet to “push” left front corner (E) into
locked position.
Tip left front corner (E) outward slightly and bend corner hinge.
ASSEMBLY – WALLS
Critical: When installing corners,
flex corner hinges back and forth
several times. This will help provide
a square corner and ensure proper
fit of remaining panels.
Important: DO NOT flex in reverse
position, as this can crack the panel.