Owners manual

Assembly–Headers and Trusses (continued)

Raise ridge beam (V/EEE) up and into rear header (K). Secure

with one screws (MM) and one nut (LL). Repeat for front header

(J).

Note: Header panels may need to be pushed inwards or

outwards slightly as ridge beam is slid into place.

CAUTION: HOLES ON TOP OF RIDGE BEAM SHOULD

BE FACING TOWARDS ROOF.

Attach the roof truss assembly to the ridge beam with one

screw (JJ) for each truss assembly.

x2x2

Attach truss strap (GG) to side adaptor bracket (FF) or full

length side adapter brackets (ZZ) with two screws (JJ). Repeat

for remaining truss straps.

V/EEE