Charging a Battery QUOTE: To ensure manumit performance and ife of Burnisher battery packs, charge the battery pack fully before first use. 1. Plug the charger Into an appropriate outset before Inserting battery pack. 2. Connect the charger and battery pack, making sure the battery Is sully seated. The (charging} it wil blink continuously indicating that the charging process has started. 3. The completion of charge will be indicated by the fight remaining ON continuously.
HELENE SAVE THESE INSTRUCTIONS FOR FUTURE USE Intended Use This hedge extremer s desired for residential use. D NOT use under wet conditions or in presence of flammable liquids or gases. B0 RO let children come into contact with the o, Suspension Is required when inexperienced operators Use this toil ASSEMBLY AND ADJUSTMENTS B WARNING: roreucesrerskor saris personal injury, turn unit off and remove.
3, LEVEL HEDGES {Fig. 1 To obtain exceptionally level hedges a piece of string can be stretched sing the length of the hedge as a goods, Fig.t / 4, SIDE TRIMMING HEDGES Fig. J) Tent the timer as shown and begin at the bottom and sweep up, Fig.J 5. POWER SAW (Fig. K} For branches too fare for the bide 8 ta o, Lse the postwar 3, Posting the postwar as dose ta the bettor of the branch 25 possible Place the pawpaw shoe against the branch.
