Assembly Instructions

Items Needed:

#8 - 32 x 3/8" Self Tapping Screw (Qty: 16)

Slide (8)

Process:

• Install (8) frame slides (Fu) on workbench frame, as

shown, using (2) screws in each (Fu).

Items Needed:

Square

4" Drawer

6" Drawer (2)

9" Drawer

Note: Before inserting each drawer, fully extend the frame

slides for that drawer.

Process:

• Insert the drawer slides (Fd) into the workbench slides

(Fu) and push all of the way to the back.

• Pull the drawer open until it stops to ensure proper

assembly.

• Repeat for the rest of the drawers.

Workbench top

removed for clarity

#8 - 32 x 3/8”

Self Tapping

Screw

NOTE: Drawers may be organized in several

congurations,belowistheslidepositioningforthe

recommendeddrawerconguration.

Front

• Square the unit and adjust for frame for drawer

alignment and smooth operation.

• Remove enough drawers to reach all fasteners. (See

drawer removal and installation instructions.)

• Wrench tighten all fasteners.

• Reinstall drawers. (See drawer removal and installation

instructions.)

Recommended

drawerconguration