Assembly Instructions

6
OPERATION
• Empty the drawer.
• Fully extend the drawer
REMOVING DRAWERS
Right Release Lever
Left Release Lever
• Push the lever on the right slide down, lift the lever on
the left side up. Pull out drawer to remove.
• Pull slides and slide carrier out to fully extended position
(see illustration).
• Hold the slide on the cabinet while aligning it with the
slide on drawer.
• Slightly insert one side and repeat for the other side.
• Slowly push drawer to its fully closed position to engage
slide.
• Open drawer and reclose to ensure proper operation.
INSTALLING DRAWERS
slide carrier
slide
slide carrier
slide
REMOVING AND INSTALLING SLIDES
•Toremovetheslidefromtheunit,rstremovethe 
drawer.
• Remove screw.
• To reinstall the slide in the appropriate position in the
unit, align front and back lances with mounting holes in
the side of the unit. Pull towards the front of the unit and
downwards until screw holes in slide line up with holes
in the unit. Replace screw
• For smooth operation, make sure the drawers are
matched with their original slides.
Screw
Leveling Foot Adjustment
•Adjustlevelingfoottodesiredpositionwithathead
screwdriver or 7/16 open end wrench as shown.