Instruction Manual

Spindle lock will not pop up:

Use a lubricant spray such as

WD-40 and spray the outside of

the spindle and the around

the spindle. Turn the spindle

lock left and right until spindle

lock pops up. Continue to

lubricate until spindle lock

works smoothly.

1. Debris is in between body and spindle lock .

2. Debris is between spindle lock and spindle .

ENGLISH

Storage

Before you store the tool, make sure you do the following:

Thank you for your purchase. Register your product now for:

1. Review the Maintenance section on the preceding pages and perform scheduled

maintenance as necessary.

2. Tool must be well cleaned and lightly lubricated before storing.

3. Store the tool in a dry, safe place out of the reach of children.

• WARRANTY SERVICE: Registering your product will help you obtain more eﬃcient

warranty service in case there is a problem with your product.

• CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as ﬁre, ﬂood or

theft, your registration of ownership will serve as your proof of purchase.

• FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely

event a safety notiﬁcation is required under the Federal Consumer Safety Act.

TROUBLESHOOTING