Operator's Manual 18.0 Volt 51/2-in. Cordless Circular Saw Model No. 172.67098 In Kit 9-11518 Battery Pack is installed on Drill/Driver CHARGE BATTERY BEFORE FIRST USE ! CAUTION Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.craftsman.
TABLE OF CONTENTS SAFETY SYMBOLS Warranty.....…………………………………………...............................Page 2 Safety Symbols....……………………………..…….............................Page 3 Safety Instructions....………………………………...............................Pages 4-11 Glossary of Terms....………………………………...............................Pages 12-13 Unpacking.....……………………………………................................... Page 13 Description.........................................................................................
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS cont. ! WARNING: BE SURE to read and understand all instructions in this manual before using this circular saw. Failure to follow all instructions may result in hazardous radiation exposure, electric shock, fire and/or serious personal injury. PERSONAL SAFETY cont. 9. USE SAFETY EQUIPMENT. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. 10.
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. ELECTRICAL SAFETY ! SERVICE SAFETY cont. WARNING: BE SURE to read and understand all instructions before operating this saw. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charging stand /transformer for the battery.
SAFETY INSTRUCTIONS cont. SAFETY RULES FOR CORDLESS CIRCULAR SAWS cont. 8. HOLD TOOL by insulated gripping surfaces (handles) when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make the exposed metal parts of the tool “live” and shock the operator. 9. ALWAYS clamp the workpiece securely so it will not move when making the cut. 10. When ripping, ALWAYS USE a rip fence or straight edge guide.
SAFETY INSTRUCTIONS cont. SAFETY RULES FOR BATTERY CHARGING STAND / TRANSFORMER cont. 3. Do not abuse the cord on the battery charging stand / transformer. Never carry the charging stand / transformer by its power cord. Never pull the power cord to remove the transformer from the power outlet. Damage to the cord or charging stand / transformer could occur and create an electric shock hazard. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately.
GLOSSARY OF TERMS FOR WOODWORKING Spindle The shaft on which a blade or cutting tool is mounted. Also called the Arbor. Revolutions Per Minute (RPM) The number of turns completed by a spinning object in one minute. Saw Blade Path The area over, under, behind or in front of the blade, as it applies to the workpiece. That area which will be or has been cut by the blade. Set The distance that the saw blade tooth is bent (or set) outward from the face of the blade.
DESCRIPTION DESCRIPTION cont. KNOW YOUR CORDLESS CIRCULAR SAW (Fig. 2) This Cordless Circular Saw has the following features: NOTE: Before attempting to use this product, familiarize yourself with all operating features and safety rules. Trigger Switch Fig. 2 Rear Handle Power Lock-Off Button Battery Pack (installed on Drill/Driver) 1. 3400 RPM no-load speed provides power and torque for fast, sure cuts in wood, plywood, hardboard and wood-base materials. 2.
OPERATION OPERATION cont. ! WARNING: A 5 1/2-inch blade is the maximum blade capacity of your saw. A larger than 5 1/2-inch blade will come in contact with the blade guards. Also, NEVER use a blade that is so thick that it prevents the outer blade washer from engaging with the flat side of the spindle. Blades that are too large or too thick can result in an accident causing serious injury. SAW BLADES All saw blades need to be kept clean, sharp and properly set in order to cut efficiently.
OPERATION cont. OPERATION cont. Ways to Help Prevent Kickback cont. CHARGING THE BATTERY PACK (Fig. 8 and 8a) 3. Inspect the workpiece for knots or nails before cutting. Never saw into a knot or nail. The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge overnight prior to use. 4. DO NOT cut warped or wet lumber. (see Fig. 5a) 5. ALWAYS support large panels to minimize the risk of blade pinching and Kickback.
OPERATION cont. OPERATION cont. CHARGING A HOT BATTERY PACK MAKING DEPTH-OF-CUT ADJUSTMENTS (Fig. 11 and 11a) When using your tool continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. ALWAYS use the correct blade depth setting. The correct blade depth setting for all cuts should not be more than 1/4-inch below the material being cut (see Fig. 4).
OPERATION cont. OPERATION cont. STARTING A CUT (Fig. 12) TO HELP MAINTAIN CONTROL cont.: ! WARNING: ALWAYS clamp and support workpiece securely. ALWAYS maintain proper control of saw. Failure to clamp and support workpiece and loss of control of saw could result in serious injury. 1. ALWAYS use your saw with your hands positioned correctly, with one hand operating the trigger switch and the other on the front assist handle (see Fig. 12).
OPERATION cont. OPERATION cont. USING A STRAIGHT EDGE (Fig. 15) HOW TO SET YOUR BEVEL ANGLE (Fig. 17) ! WARNING: ALWAYS clamp and support workpiece securely. ALWAYS maintain proper control of saw. Failure to clamp and support workpiece combined with loss of control of saw could result in serious injury. 1. You can make an efficient rip guide by clamping a straight edge to your workpiece. 2. Carefully guide the saw along the straight edge for a straight rip cut (see Fig. 15). 3.
OPERATION cont. OPERATION cont. MAKING POCKET CUTS ( Fig. 19) BUILT-IN SAWDUST EJECTION CHUTE (Fig. 20 and 20a) ! WARNING: ALWAYS adjust bevel setting to zero before making a pocket cut. Attempting a pocket cut at any other setting can result in a loss of control of the saw, which can result in serious injury. 1. Remove the battery pack from saw. ! WARNING: Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury. 1.
MAINTENANCE cont. MAINTENANCE cont. CHANGING THE BLADE (Figs. 21 and 21a) CHANGING THE BLADE (Figs. 21 and 21a) cont. Fig. 21a Fig. 21 Spindle Spindle Lock Outer “D” Washer 8. The remaining washer is the inner bushing washer that fits around the spindle shaft and it does not need to be removed. 9. Put a drop of machine oil onto the inner bushing washer and outer “D” washer where they will touch the blade. 10.
ACCESSORIES MAINTENANCE cont. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and / or disposal options. ! WARNING: Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape.
PARTS LIST cont. Item No. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 47 48 49 50 51 52 104 105 Parts No. CSC18GU-22 CSC18GU-23 CSC18GU-24 CSC18GU-25 CSC18GU-26 CSC18GU-27 CSC18GU-28 CSC18GU-29 CSC18GU-30 CSC18GU-31 CSC18GU-32 CSC18GU-33 CSC18GU-34 CSC18GU-35 CSC18GU-36 CSC18GU-37 CSC18GU-38 CSC18GU-39 CSC18GU-40 CSC18GU-41 CSC18GU-42 CSC18GU-43 CSC18GU-44 CSC18GU-45 CSC18GU-47 CSC18GU-48 CSC18GU-49 CSC18GU-50 CSC18GU-51 CSC18GU-52 CSC18GU-104 CSC18GU-105 5 1/2-in.
Manual del Operador Get it fixed, at your home or ours! Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com 18.0 Voltios 5 1/2 Pulgadas Sierra Circular Inalámbrica For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.
Operator’s Manual Get it fixed, at your home or ours! Your Home For expert troubleshooting and home solutions advice: 3/8-in. Variable Speed / Reversible 18.0 Volt Cordless Drill / Driver 11 www.managemyhome.com ® For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME® Model No. 172.64120 18.
TABLE OF CONTENTS SAFETY SYMBOLS Warranty……………........................................................…………………………..Page 2 Safety Symbols……........................................................……………………….….Page 3 Safety Instructions…........................................................………………………….Pages 4 - 10 Carton Contents ………….........................................................………. ………….Page 11 Description ......................................................
SAFETY INSTRUCTIONS ! SAFETY INSTRUCTIONS cont. WARNING: BE SURE to read and understand all instructions in this manual before using this drill / driver. Failure to follow all instructions may result in electric shock, fire and/or serious personal injury. WORK AREA SAFETY 1. Keep your work area clean and well lit. Cluttered workbenches and dark areas invite accidents. 2. DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. ELECTRICAL SAFETY ! SERVICE SAFETY cont. WARNING: BE SURE to read and understand all instructions before operating this drill/driver. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charging stand/transformer for the battery.
SAFETY INSTRUCTIONS cont. SPECIFIC SAFETY RULES FOR CORDLESS DRILL / DRIVERS cont. SAFETY INSTRUCTIONS cont. SAFETY RULES FOR BATTERY CHARGING STAND / TRANSFORMER cont. 13. Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. 14.
11 PACKING LIST (Fig.1) 7 known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products. • Arsenic and chromium, from chemically treated lumber. Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals: • Work in a well-ventilated area.
DESCRIPTION cont. DESCRIPTION This Cordless Drill / Driver has the following features cont.: KNOW YOUR CORDLESS DRILL / DRIVER (Fig. 2) NOTE: Before attempting to use this product, familiarize yourself with all operating features and safety rules. Fig. 2 Torque Adjustment Collar ® 1 3 5 7. Ergonomic “T” Handle Design with molded in comfort grip provides maximum control, added balance and gripping comfort.
OPERATION cont. OPERATION FORWARD / REVERSE SELECTOR SWITCH with POWER LOCK-OFF (Fig. 3, 3a, 3b) Fig. 3 Fig. 3a Fig. 3b CHARGING THE BATTERY PACK (Fig. 5 and 5a) The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge overnight prior to use. NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) for them to become fully charged.
OPERATION cont. OPERATION cont. CHARGING THE BATTERY PACK cont. (Fig. 5 and 5a) TRIGGER SWITCH (Fig. 7 and 7a) 8. The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem. 9. Do not place the battery charging stand / transformer in an area of extreme heat or cold. It will work best at normal room temperature. 10. When battery pack becomes fully charged, unplug battery charging stand / transformer from power supply and remove the battery pack.
OPERATION cont. OPERATION cont. ELECTRIC BRAKE 23 PLUS 1 ADJUSTABLE TORQUE CLUTCH (Fig. 10, 10a and 10b) To stop the drill / driver, release the trigger switch and the electric brake will stop the chuck instantly. Ideal when driving screws, nuts and bolts. This drill / driver is equipped with an adjustable clutch that has 24 different torque settings. These torque settings allow you to efficiently perform various drilling and screw driving applications.
OPERATION cont. OPERATION cont. BUBBLE LEVEL (Fig. 11) INSTALLING ACCESSORY BITS (Figs.13 and 13a) cont. Fig. 11 In order to insure a perfect right angle when drilling / driving into a workpiece, you can use the built-in bubble level on the top of the drill / driver (see Fig. 11). The bubble level is designed to work when drilling / driving in horizontal position.
OPERATION cont. OPERATION cont. OPERATION AS A DRILL (Fig. 15) . Install and tighten the Fig. 16 Turn and set the torque clutch collar to the desired torque setting, 1 through 23. Install and tighten the desired fastener accessory bit into the chuck. 1. Install the battery pack into the drill / driver. 2. Push the forward / reverse selector switch to the forward position. 3. Set the collar to the lowest setting, “1” 4. Drive and tighten the first screw 5.
MAINTENANCE MAINTENANCE GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil and grease, etc. ! WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
ACCESSORIES cont. PARTS LIST BATTERIES 3/8-IN. VARIABLE SPEED / REVERSIBLE CORDLESS DRILL / DRIVER Model No. 172.64120 18.0 Volt (in Kit 172.11518) The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out.
PARTS LIST cont. NOTES 3/8-IN. VARIABLE SPEED / REVERSIBLE CORDLESS DRILL / DRIVER Model No. 172.64120 18.0 Volt (in Kit 172.11518) Item No. 1 2 3 4 5 101 6 7 8 40 41 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 102 26 27 28 29 30 103 31 32 33 34 35 36 37 38 39 104 105 Parts No.
NOTES Manual del Operador 3/8-pulg. Velocidad Variable / Reversible 5 3 ® 1 Modelo No. 172.64120 18.0 Voltios En Equipo 9-11518 7 11 18 Voltios Taladro / Destornillador Inalámbrico ® CARGUE LA BATERÍA ANTES DE UTILIZAR POR PRIMERA VEZ ! PRECAUCIÓN: Lea, comprenda y siga todas las Normas de Seguridad e Instrucciones de Operación en este Manual antes de usar este producto. Sears, Roebuck and Co., Hoffman Estates, IL 60179 EE.UU. Vea nuestro sitio web de Craftsman: www.sears.
