Operator's Manual j CRRFTSMRH°j evolv M 3.6 Volt SCREWDRIVER Model No. 320.17088 0Q0s CHARGE BATTERY BEFORE FIRST USE WARNING: To reduce the risk of injury, the user must read and understand the Operator's Manual before using this product. Sears Brands www.craftsman.
Warranty SafetySymbols SafetyInstructions Description Assembly Operation Maintenance Troubleshooting Exploded ViewandPartList SearsRepairPartsPhoneNumber page2 page3 page4-9 page9-10 page10-11 page12-14 page15 page15 page16-17 BackCover CRAFTSMAN ®EVOLVFULLWARRANTY IfthisCraftsman@ Evolvtoolfailsto givecomplete satisfaction within oneyearfromthedateofpurchase, returnitto anySearsstoreor other Craftsman@ EvolvoutletintheUnitedStatesforfreereplacement.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
WARNING: Read all safety warnings and instructions. warnings and instructions Failure to follow the may result in electric shock, fire and / or serious injury. WARNING: Do not attempt to operate this tool until you have thoroughly read all instructions, safety rules, and warnings. Failure to comply with them can result in fire, electric shock, or serious personal injury. Save the manual and refer to it frequently. Save all warnings and instructions for future reference.
PERSONAL SAFETY = Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. = Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Keep cutting sharp cutting tools sharp and clean. Properly maintained cutting tools with edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. BATTERY TOOL USE AND CARE • Recharge only with the charger specified by the manufacturer.
SPECiFiC SAFETY WARNING: RULES FOR SCREWDRIVER To avoid injury, hold the tool by the insulated gripping surfaces only. if the tool contacts hidden wiring or its own cord, exposed metal parts of the tool could shock the operator and cause serious injury. Make sure that hidden electrical wiring, water pipes, or other hazards are not in the cutting path. WARNING: To reduce the risk of injury, user must read instruction manual. ,, Do not use dull or damaged bits and accessories.
burst, causing personal injury or damage. Do not use Power unit outdoors or expose to wet or damp conditions. Water entering charger will increase the risk of electric shock. = Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock or injury to persons. Following this rule will reduce the risk of electric shock, fire or serious personal injury. Do not abuse cord or power unit. Never use the cord to carry the power unit.
at Sears Service Center when service or repair is required. reassembly may result in a risk of electric shock or fire. Incorrect = Disconnect power unit from the power supply when not in use.. This will help prevent damage to the power unit during a power surge. * Risk of electric shock. Do not touch uninsulated connector or uninsulated battery terminal. • Save these instructions. Refer to them frequently and use them to instruct others who may use this tool.
_I_ WARNING: Your screwdriver should never be attached to the power unit when you are assembling parts, making adjustments, installing or removing bits, cleaning, or when it is not in use. When unpacking the box, do not discard any packing materials until all of the contents are accounted for: 1. 2. Carefully surface. lift the screwdriver out of the carton and place it on a stable, flat Open the box to locate the following: ® Screwdriver ® Power unit ® Operator's manual 3.
work light. To secure your new rechargeable screwdriver from possible failure, the battery is in a low-charge condition when initially shipped. Therefore, you should charge it at for least 10 hours prior to use. Charging your tool for at least 10 hours during the first cycle of use will insure optimum battery performance. _, WARNING: Do not allow familiarity Fig. 1 with your screwdriver to make you careless. Remember that a careless fraction of a second injury.
For low light situations. POWER UNIT After the initial charging optimum performance. TO CHARGE cycle, the tool should be charged for 3-5 hours for (FIG. 2) Make sure your screwdriver charge it. has completely Insert the power unit plug into charging socket, making sure they are properly connected. stopped before attempting to Forward/ Reverse Switch Fig. 2 Power unit can be used with normal house voltage of 120 volts, 60 Hz, AC only. Connect the power unit to the power supply.
For best results, 1/4" screwdriver Never engage the trigger bits are recommended. switch when changing Always lock the trigger switch when changing switch instructions) FORWARD/REVERSE SWITCH screwdriver bits. drill bits. (See forward/reverse (Fig.4) The forward/reverse switch determines the running direction of the tool and also serves as a trigger switch lock. Fig.
can be used but nothing like alcohol, gasoline, or other such leaning agents. Never use caustic agents to clean plastic parts. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operations or when blowing dust. If operation is dusty, also wear a dust mask. WARNING: Keep the tool air vents unclogged WARNING: Avoid using solvents when cleaning and clean at all times. plastic parts.
PROBLEM The screwdriver not work 17088 Manual does Revised 09-0728 CAUSE SOLUTION Battery pack is exhausted Recharge the battery pack Page 15
Screwdriver Always MODEL NUMBER 320.17088 mention the Model Number when ordering / J parts for this tool \ \ \ \ \ \ \\\\\\\\\\\\\\\ I c_<:, 17088 Manual Revised 09-0728 Page 16
1 43789 Left Housing 1 2 43773 Round Pin 1 3 43791 Reversing Levers 1 4 43792 Ornament Cover 1 5 70286 Tapping 6 01109 Reed 1 7 TH0709-7 Gear Box 1 8 43790 Switch Button 1 9 70362 Tapping 5 10 43789 Right Housing 1 11 43774 Spring 1 12 34700 Current-conducting 13 43771 Reversing 14 43772 Charging 15 92119 Paper Washer 2 16 90169 Battery Pack 1 17088 Manual Revised 09-0728 Screw 1 Screw Plate Levers Circuit Circuit Board 1 Board 1 1 Page
17088 Manual Revised 09=0728 Page 18
17088 Manual Revised 09=0728 Page 19
Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME (1-800-469-4663) www.sears.