Owner`s manual

ASSEMBLY
WELD NUT
FROM THE TOP.
HOOK POINTS
DOWN
LOCK
WASHER
WELD.
NUT _ SCREW
-\
LATCH
HOOK
WASHER
MULCHER
PLATE
LOCK
WASHER
WASHER
WELD
NUT
DEFLECTOR
SHIELD
FIG. 4
L
'LATCH
HOOKS
- v" CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRA CTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BESTPERFORMANCE AND SATISFACTION FROM
THIS QUALITY PRODUCT
PLEASE REVIEW THE FOLLOWING CHECKLIST.
,/ Ail assembly instructions have been completed..
,/ No remaining loose parts in carton.
v" Battery is properly prepared and charged. (Minimum
1 hour at 6 amps)_
Seat is adjusted comfortably and tightened securely
,/" AII tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,," Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling)
,/ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers
-/ Check wiring_ See that all connections are still secure
and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLL OWING IMPORTANT
ITEMS:
,/ Engine oit is at proper level
,/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline_
/ Become familiar with all controls - their location and
function Operate them before you start the engine
,/ Be sure brake system is in safe operating condition
FIGo 5;
9