Product specifications

CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE _'_'__ ._o_ _ _°_'/
AS*OUCOMPLETE
REOOLA°SERV,CE "
ion
Check Operator Presence and
T Interlock Systems
R Check for Loose Fasteners _ tl_7
Sharpen/Replace Mower Blades _4
T Lubrication Chart V p
O Check Battery Level
R Clean Battery and Terminals V' V'
Check Transaxle Cooling
Adjust Blade Belt(s) Tension V's
Adjust Motion Drive Belt(s) Tension V'5
Check Engine Oil Level V' If
Change Engine Oil _.3
E Clean Air Filter Vw2
N Clean Air Screen V'2
v"
Inspect Muffler/Spark Arrester
Replace Oil Filter (If equipped) ll_l,_
N Clean Engine Cooling Fins Vw2
Replace Spark Plug if if
Replace Air Filter Paper Cartridge V'2
Replace Fuel Filter
1 - Change more o f'_e n when operating under a hea W load Or In high ambient temperatures. 5 - If equipped With adjustable system.
2 - Service more often when operating in dirty of dusty conditions. 6 * Not required if equipped with maintenance-free batte_
3 * If equipped with oil filter, chang== oil evlry 50 hours. 7 - Tighten front axle pivot tcolt to 35 ft.-Ibs, maximum.
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your trac-
tor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Checktire pressure.
• Check operator presence and interlock
systems for proper operation.
• Check for loose fasteners.
OS
Zerk Zerk
Front
O Front Wheel Wheel
Bearing
Bearing Zerk Zerk
O Engine
@ Attachment I ' : @ Gear-
I
Clutch _ ' shift
Pivot(s)
, , , ..' Pivots
O SAE 30 or 10w30 Motor OIL
O General Purpose Grease
_) Refer to Maintenance "Engine" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon bear-
ings. Viscous lubricants will attract dust
and dirt that will shorten the life of the self-
lubricating bearings. If you feel they must
be lubricated, use only a dry, powdered
graphite type lubricant sparingly.
18