Lawn Sweeper User Manual

Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

ASSEMBLY

TOOLS REQUIRED FOR ASSEMBLY

(2) 7/16" Wrenches

(2) 1/2" Wrench

(1) Pliers

(1) Hammer

STEP 1: (SEE FIGURE 1)

Install a 5/16-18 x 2-3/4" hex bolt (17) and a 5/16" •

jam nut (25) in each bag arm channel.

STEP 2: (SEE FIGURE 2)

Slide the bag arm channels (4) into the sweeper •

housingasshowningure2.Securethemtothe

sweeper housing with a 5/16-18 x 2-1/2" hex bolt (15)

and 5/16" nylock nut (21). Tighten bolt until snug. Do

not overtighten.

STEP 3: (SEE FIGURE 3)

Secure each bag arm channel to the side of the •

sweeper housing with a plastic wing nut (31) installed

onto the bolt assembled in step 1.

Insert a pivot rod retainer (30) down into the end of •

each bag arm channel.

Install a compression spring (32) into the bottom of •

each of the pivot rod retainers to secure them to the

bag arm channels.

FIGURE 4

STEP 4: (SEE FIGURE 4)

Attach the drawbar (14) to the sweeper by fastening •

a drawbar bracket (8) above and below the drawbar

using three 5/16" x 2-1/2" hex bolts (15) and 5/16"

nylock nuts (21).

FIGURE 1

FIGURE 2

FIGURE 3