Owner`s manual

Shipping position
Medium low
Medium high
Low
High
x_X_. _ Lower handle
Squeeze toX'x_'x,X
Hairpin clip Mounting
bracket
ENGINE
CARBURETOR
Your carburetor has a non-adjustable fixed
main jet for mixture control, if your engine
does not operate properly due to suspected
carburetor problems, take your lawn mower to
an authorized service center for repair and
adjustment.
ENGINE SPEED
The engine speed has been factory seL Do
not attempt to increase engine speed as it
may result in personal injury° Ifyou believe the
engine is running too fast or too slow, take
your lawn mower to an authorized service
center for repair and adjustment.
Immediately prepare your lawn mower for
storage at the end of the season or if the unit
wilt not be used for 30 days or more.
LAWN MOWER
When lawn mower is to be stored for a period
of time, clean itthoroughly,remove all dirt,
grease, leaves, etc. Store in a clean, dry area.
= Clean entire lawn mower (See "CLEANING"
inthe Customer Responsibilities section of
this manual).
• Lubricate as shown in the Customer
Responsibilities section of this manual
o Be sure that all nuts, bolts, screws, and pins
are securely fastened. Inspect moving
parts for damage, breakage and wear,
Replace if necessary°
o Touch up all rusted or chipped paint
surfaces; sand lightly before painting.
HANDLE
You can fold your lawn mower handle for
storage.
° Squeeze the bottom ends of the lower
handle toward each other until the lower
handle dears the handle bracket, then
move handle forward.
o Loosen upper handle mounting bolts
enough to allow upper handle to be folded
back.
IMPORTANT; When folding the handle for
storage or transportation, be sure to fold the
handle as shown or you amy damage the
control cables.
o When setting up your handle from the
storage position, the lower handle will
automatically lock into the mowing position,
Lower handle
Squeeze tc
remove
Mounting
Hairpin clip bracket
Operator presence control bar
Upper handle--___."-'-'-J_ ,;//,_:'}
..: _xf// Mowing
" position
Lower handle
12