User's Guide

4
Chapter 2
Initial Installation
This Chapter covers the software installation of the Multiple RF Home Gate-
way.
Requirements
 Use a standard 10/100/1000 Base T network (UTP) cable with RJ45 connector.
Procedure
1. Choose an Installation Site
This Gateway is designed for using in fixed position.
Please select a suitable place to install the Multiple RF Home Gateway.
2. Connect LAN Cable
Use a standard LAN cable to connect the device to the Ethernet port on the Multiple RF
Home Gateway.
3. Power Up
Connect the supplied power adapter to the Multiple RF Home Gateway. Use only the pow-
er adapter provided. Using a different one may cause hardware damage.
4. Check the LEDs
 The Power LED should be ON.
2