Owner's Manual

ManualsBrandsCraftsman ManualsTractor AttachmentsCraftsman Snow and Dozer Blade 16 in. High

SCRAPER

BAR

BLADE

ASSEMBLY

CARRIAGE BOLTS

AND NUTS

FIGURE 36

CHECK FOR LOOSE FASTENERS

• During the operating season, check all bolts, nuts and

hairpin cotters to be sure they are secure.

CHECK SCRAPER AND SHOES FOR WEAR

• During the operating season, check the scraper and

shoes for wear before each use. After extensive use

and wear, the scraper bar may be reversed to utilize

the unused top edge. See ﬁ gure 36.

CLEAN BLADE

•

During the operating season, clean the blade off after

each use. Touch up any bare metal with paint or

apply a light coat of grease or rust preventive.

LUBRICATE BLADE

• Oil all pivot points each season so they will work

freely.

CUSTOMER RESPONSIBILITIES

• Read and follow the maintenance schedule and the maintenance procedures listed in this section.

Service Dates

Check for loose fasteners X

Check scraper and shoes for wear X

Clean Blade X X

Lubricate Blade X

MAINTENANCE SCHEDULE

Fill in dates as you

complete regular service.

Before each use

After each use

Every season

Before storage

MAINTENANCE

CAUSE

PROBLEM

CORRECTION

Blade is difﬁ cult to pivot.

Blade is difﬁ cult to raise.

Blade will not unlock to pivot.

TROUBLESHOOTING

Lift mechanism is binding. Lubricate pivot points.

Handle tube is binding on lift rod. Lubricate lift handle rod.

Lock mechanism is out of adjustment Refer to the Operation section on

and is not disengaging. page 14.