Owner's Manual

17
RECOMMENDATIONS WHEN STORING
• When the dozer is not being used, remove all dirt and
rust and touch up with paint.
• Apply a light coat of grease or rust prevention to the
blade and oil pivot points.
• Store in an area where it is protected from weather.
• Store in a dry area, protected from weather.
REMOVING DOZER BLADE FROM TRACTOR
1. Lower blade to ground with blade in the center
(straight ahead) position.
2. Refer to fi gure 37 below:
A. Remove cotter pins and lift links from side plates.
B. Remove attachment rod from blade frame
assembly.
C. Pull blade frame assembly from side plates.
NOTE:
Frame brackets do not require removal unless a
different attachment is mounted to front of tractor.
CLEVIS
PIN
ATTACHMENT ROD
LIFT LINK
HAIRPIN
COTTER
FIGURE 37
STORAGE
ACCESSORIES AND ATTACHMENTS
WHEEL
WEIGHT
TIRE CHAINS
WEIGHT BR
A
CKET
FOR DR
A
W
AW A
B
AR
SN
O
W CAB
These and other accessories are recommended for use with your unit. Call 1-800-4-MY-HOME® to fi nd out if they are available.
If available, they may be purchased at most Craftsman outlets or by calling 1-800-4-MY-HOME®.