Owner's Manual

ACCESSORY TABLE USAGE
Th|saccessory table has been spec'dtcaltydesignedfor
usewith listedCraftsmenRoutars.The holepatternon the
accessory table has notbeen drffladto accommodate all
reuters. Reuters must notexceed 3 HP (maximumdevel-
oped) or weigh morethan 12-1/2 Ibs. Reutersmust have
took-onswitch feature.
TABLE CLAMP|NG BRACKET
See Figure 51.
The lever on the accessory table wilt.tighten the table se-
curelyto the front rail.The weight of the muter may cause
the accessory table to loosenorhave movementst the
rearof the table. To avoid this, installthe table clamping
bracket.
NOTE: Positionthe table clampingbracket so that the
accessorytable iscenteredover it.
II Slide one of the T-nuts into the front channelof the
rearrail and underthe aooeseorytable.
• The table clamping bracketfits in the bottom slot of
the rear railand the slotted top of the bracketwraps
aroundthe raisedportion on the undersideofthe
accessorytable.
• Secure wlth a 5/16 in. washer and a 5/16-18 x 3/4 in.
knob bolt.
• Tighten the knobbolt securely.
TABLECLAMPINGBRACKET
SHOWNCOMPLETELY _
ASSEMBLED__,._
ACCESSORY L L_L)_
T.,E
TABLECLAMPING
BRACKET
T-NUT
_/'16in.WASHER
KNOBBOLT
END
CAP
Fig. 51
T-NUTBETWEEN
ADJUSTMENT
SCREWS
REAR
ADJUSTMENT
SCREW
RIPFENCESHOWNLOCKEDAGAINSTSAWBLADE
Fig, 52
TO INSTALL T-NU'£_ FOR GUIDE FENCE
BRACKETS
See Figures52.53.
• Placeripfence againstblade and lock in place,
• Usingthe appropriatehex key suppliedwithyour table
saw,remove the rearadjustmentscrewand washeron
top of the rip fence.
• Slideone ofthe T-nutsintothe top channelof ripfence
and placebetween the two adjustmentscrews.
NOTE: T-nutsinstallfrom the rearof the rip fence.
• Replacethewasher and the rearadjustmentscrew and
tighten securely.
• Checkthe ripfsncs for squarsnesswith ths saw blade,
• Unlocktheripfence, slideitaway from thesaw blade,
and lockit in place,
Slidethe fourremainingT-nutsintothetop channelof
ripfence.
NOTE: FiveT-nutsshouldbe inthe top channelof
the ripfencewith onlyone ofthem between the
adjustmentscrewson the rip fence.
37