DVD PLAYER Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference.
IMPORTANT SAFETY INSTRUCTIONS 17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
IMPORTANT SAFETY INSTRUCTIONS(CONTINUED) NOTES ON HANDLING: When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish.
ABOUT ABOUT DISCS DISCS The region number for this DVD Player is: See the following page for information regarding region numbers. 1 PLAYABLE DISCS: The following discs can be played back on this DVD player: DISC TYPES: DVD Data on most DVDs is divided into sections called titles and then into subsections called chapters, each of which is given a title or chapter number. Some features of this DVD player will not operate with some DVD discs as they are preset.
LOCATION OF CONTROLS 3 4 1.Disc Tray 2.Remote Sensor 3. (Open/Close) Button 4. (Standby) Button 5.Standby lndicator 1 2 5 7 6. Audi o L- R ( L eft/Righ t ) O ut J acks DC 7.Component Video (Y,Pb,Pr) Output Jacks DC IN 5V,1.2A 8.VIDEO OUT J ack 9 6 8 - 6- 9.DC IN Jack (DC 5V, 1.
LOCATION OF FEATURES 1. OPEN/CLOSE Button 2. 0–9, 10+ Buttons 17 1 18 2 19 3 20 3. MENU Button 4. ENTER Button 5. 6. 7. 8. 9. 10. 11. Direction Button Buttons Button OSD (On Screen Display)Button SUBTITLE Button N/P (NTSC/PAL) Button ANGLE Button 4 12. ZOOM Button 5 13. REPEAT Button 14. A-B Button 6 21 7 22 8 24 9 11 13 15 10 WIDE 26 VIDEO 12 14 28 RANDOM 30 GOTO 16 32 23 25 27 29 31 15. 16. 17. 18. PROG (Program) Button CLEAR Button POWER Button VOLUME +/– Buttons 19.
BATTERY INSTALLATION directions.) WIDE VIDEO RANDOM GOTO Remarks: 1. When there is an obstacle between the unit and the transmitter, the transmitter may not operation. 2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote control of the unit, the remote operation may be unstable.
CONNECT TO TV: Connect to TV through AV (Video/Audio) Output Jacks (AV Connection cable included ): DC DC IN 5V,1.2A supplied Connect (YUV Connection cable NOT included ): DC DC IN 5V,1.
DVD PLAYBACK OPERATIONS Playback of a DVD: 1. Connect the unit to AC/DC Adaptor and connect AC/DC Adaptor to AC power as previous procedures. The Red Indicator will light. 2. Press the Button on the unit or on the Remote Control to power on the unit. The color of Indicator will turn to Green. 3. Press the Button on front panel or Remote Control to open the disc door. Place the disc on the tray with label side facing up. Close the disc door by press the Button.
OPERATIONS Playback of a JPEG ( PICTURE); MP3 disc: 1. Turn on the player and place the disc into the player as previous procedures. The folder/files list will appear on the screen. 2. Use the Direction Buttons to select and highlight the desired folder then press the ENTER Button to enter. The file list will appear on the screen. 3. Using the Direction Buttons to select and highlight the desired file then press the ENTER Button to start playback.
OPERATIONS OSD (On Screen Display) During playback, press the OSD Button repeatedly to read the information of playback status. STEP During movie playback, press STEP Button repeatedly to play the movie frame by frame. Press the Play/Pause Button to resume normal playback. ZOOM During movies playback, press the ZOOM Button repeatedly to zoom in the picture. WIDE Press repeatedly to select and set the aspect ratio. RANDOM Press to turn on (plays the tracks randomly) or off the random playback function.
SYSTEM SETUP Setting Menus: In stop playback mode, press the SETUP Button, the setting menu will appear on the screen as below. Using the Direction ◄, ►, ▲, ▼ Buttons to select and hightlight the function you need to set or reset. Press the ENTER Button to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.
SYSTEM SETUP Video Setup Page: 1. If Output Mode is selected, using the Direction and ENTER Buttons to set it to CVBS or YUV as the connection of TV. ~ Set to CVBS if you connected TV through the Video/Audio Output Jacks as page 9. ~ Set to YUV if you connected TV through the Y; Pb/Cb and Pr/Cr Jacks. 2. If TV Mode is selected, using the Direction and ENTER Buttons to set it to P-Scan (Progressive Scan) or Interlace to match the system of the connected TV through the Y; Pb/Cb and Pr/Cr Jacks.
CARE AND MAINTENANCE Caring for Discs Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the disc label. Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit. If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged(scratched).
TROUBLESHOOTING GUIDE Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION GENERAL No power. Power on, but unit not functioning properly. AC/DC Adaptor unplugged. Condensation has formed. Wrong type of discs or the disc is corrupted. The disc is dirty or inserted incorrectly. The connection cables are not installed correctly. No picture and/or no sound. Playback picture rolling . Picture quality no good. The remote control is not working.
SPECIFICATIONS Power Source DC Power source of the Remote Control DC 5 V; 1.
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $10.00 (to cover shipping and handling costs) payable to Craig Electronics Inc.
