User Manual

ManualsBrandsCraig Electronics ManualsDVD Players & RecordersCraig Compact DVD/JPEG/CD-R/CD-RW/CD Player with Remote (CVD512a)

OPERATIONS

- 1 1-

POWER

VOLUME +/–

Press to increase or decrease volume.

MUTE

GOTO

Press to turn to standby mode. Press again to turn on.

SUBTITLE

ANGLE

1. Turn on the player and place the disc into the player as previous procedures.

2. Use the Direction Buttons to select and highlight the desired folder then press the ENTER Button to enter. The file

list will appear on the screen.

3. Using the Direction Buttons to select and highlight the desired file then press the ENTER

Repeat:

Notes:

1. Disc loading period of the JEPG/MP3 discs may be longer than loading DVD disc.

2. Other operation is similar to CD disc playing.

IMPORTANT NOTES:

Some discs may take a few seconds to load. If a disc is inserted incorrectly, dirty, damaged, or is not present at

all, “NO Disc” or “Bad Disc” will appear in the display.

Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title

side facing up, align it with the guides and place it in its proper position.

It is important that you read the manual that accompanies the DVD disc as there are features that are on this

DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD

disc, so they are not explained in this owner’s manual.

Button

Playback of a JPEG PICTURE MP3 disc:

The folder/files list will appear on the screen.

to start playback.

Press to turn off the sound, press again to resume.

~ To select the desired Title and Chapter, press the

GOTO Button once, the Title and Chapter selection

menu will appear on the screen. Use the Direction

and Numeric Buttons to select the desired title and

automatically.

REMOTE CONTROLS:

(Function depends on the recording of

During DVD playback, press repeatedly to select the

viewing angle

disc).

During DVD playback, press repeatedly to select the

desired subtitle (Function depends on the recording

of disc).

~ Select the desired establish time by Title to play,

press the GOTO Button twice, the time selection

table will appear on the screen. Using the Direction

and Numeric Buttons to enter the desired establish

time The unit will start plays the movie from the

selected establish time automatically.

AUDIO

depends on the recording of the disc).

Press to return to disc's menu page (Function

During DVD playback, press repeatedly to select the

desired language/audio channel

(Function depends on

the recording of disc).

( );

chapter. The unit will play the selected chapter

During playback, press the REPEAT Button repeatedly to select and set the play mode as below:

~ Repeat Folder:

~ Repeat One:

~ Single: Press REPEAT Button once to play the current file then stop. "Single" will appear on screen.

~ Select the desired establish time by Chapter to play,

press the GOTO Button three times, the time

selection table will appear on the screen. Using the

Direction and Numeric Buttons to

enter the desired

establish time. The unit will start plays the movie

from the selected establish time automatically.

Press REPEAT Button twice to play the current file repeatedly. "Repeat One" will

appear on screen.

Press REPEAT Button three times to play the files in the current folder repeatedly. "Repeat

Folder" will appear on screen.

TITLE

depends on the recording of the disc).

Press to return to disc's title page (Function

~ To cancel: Press the REPEAT Button repeatedly until " Repeat Off " appear on the screen.