User Manual

ManualsBrandsCraig Electronics ManualsDVD Players & RecordersCraig Compact DVD/JPEG/CD-R/CD-RW/CD Player with Remote (CVD512a)

- 1 3-

SYSTEM SETUP

Setting Menus:

◄, ►, ▲, ▼

General

Audio

Dolby

Video

General Setup Page

Go To General Setup Page

Preference

TV Display Wide

Angle Mark On

OSD Lang ENG

Screen Saver On

the multi-angle logo will appear on the screen.

3. If OSD Lang (On Screen Display Language) is selected, using the

TV.

On or Off. If set to On, when

multi-angles are available in the playing DVD,

and ENTER Buttons to set the

OSD language as desired.

4. If Screen Saver is selected, using the Direction and ENTER Buttons to set

it On or Off.

If set to On, the screen saver will come on when the unit stops or the image is paused for approximately

five minutes.

Setup Page:

General Setup Page:

channel on all speakers) or Mix-Mono

plays on all speakers) as desire. (Functions depend on the recording of

the disc).

to Stereo, L-Mono (Play Left

channel on

all speakers), R-Mono (Play Right

(Mixed Right and

Left channel then

dynamic level as desire or

turn it off.

Dolby Setup Page:

Last Memory

1. If TV Display is selected, using the Direction and ENTER Buttons to set the aspect ratio to

Normal/PS (4:3); Normal/LB (4:3 Letter Box) or Wide (16:9) to

to English; French or Spanish

5. If Last Memory is selected, using the Direction and ENTER Buttons to set it On or Off.

will start playback from the position where the disc was stopped last time.

1. If Downmix is selected, using the Direction and ENTER Buttons to set it to LT/RT or Stereo.

mtach the connected

2. If Angle Mark is selected, using the Directionand ENTER Buttons to set it

Direction

If set to On, when replays the same

same disc. The unit

~ If set to LT/RT, the rear left or rear right channels in Dolby 5.1 recording DVD will plays on both Left and Right Speakers.

~ If set to Stereo, the rear left channel will plays on Left Speaker; the rear right channel will plays on Right Speaker.

Note: Function depends on the recording of disc.

1. If Dual Mono is selected, using the Di

2. If Dynamic is selected, using the Di

rection and ENTER Buttons to set it

rection and ENTER Buttons to set the

In stop playback mode, press the SETUP Button, the setting menu will appear on the screen as below. Using the Direction

Buttons to select and hightlight the function you need to set or reset. Press the ENTER Button to enter or confirm the selection.

After setting, press the SETUP Button to save the settings and exit.

Speak er