Installation Instructions

Note:
If the TF (Micro SD) Card and/or USB Device had NOT
inserted into the unit, the correspondence selection will not
available.
4. During playback:
 Press the
Button on the top of unit to pause; press
again to resume to normal playback.
 Press and release the ◄ or ► buttons repeatedly to
adjust volume level as desired.
5. Press and hold the ◄ or ► buttons repeatedly to skip
tracks.
6. When finished listening, slide the Power ON/OFF Switch
to OFF position to shut off the unit.
BT:
BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair
as follows:
1. Power on the unit and enter to BT mode as previously
instructed. You will hear an audible prompt say
“Bluetooth ready for connection” and the Blue Indicator
on the front of unit will illuminate and blink.
2. Power on the external BT Device and enter to BT
searching mode. Start pairing following the on screen
instructions from the external BT Device. When paired,
the unit will sound a prompt “Bluetooth connected” and
the Blue Indicator will stop blinking.