Installation Instructions

Normal operation after pairing:
1. Power on the external BT Device and enter to BT playback
mode.
2. Power on the unit and enter to BT mode as previously
instructed. You will hear an audible prompt say
“Bluetooth ready for connection” and the Blue Indicator
on the front of unit will illuminate and blink.
3. Wait a few seconds until the unit is automatically paired
to the external BT Device. The unit will sound a prompt
“Bluetooth connected” and the Blue Indicator will stop
blinking.
4. After pairing is complete you may now play music and
answer calls with your external BT Device.
TF (Micro SD Card):
To play the music in TF (Micro SD) Card:
1. In power off mode, insert the TF (Micro SD) Card (not
included) into the TF (Micro SD) Card Slot on the rear of
unit with contacts facing up as illustrated below: