Installation Instructions

Playback Modes:

Voice Prompt:

BT (Bluetooth)

Bluetooth ready for connection

USB

TF (Micro SD) Card

Memory Card

Note:

If the TF (Micro SD) Card and/or USB Device had NOT

inserted into the unit, the correspondence selection will

not available.

4. During playback:

⚫ Press the > Button on the top of unit to pause; press

again to resume to normal playback.

⚫ Press and release the “–” or “” buttons repeatedly

to adjust volume level as desired.

5. Press and hold the “–” or “” buttons repeatedly to

skip tracks.

6. When finished listening, slide the Power ON/OFF Switch

to OFF position to shut off the unit.

BT:

BT (Bluetooth) pairing:

First time use or re-pairing the unit to a new BT Device, pair

as follows:

1. Power on the unit and enter to BT mode as previously

instructed. You will hear an audible prompt say

“Bluetooth ready for connection” and the Blue

Indicator on the front of unit will illuminate and blink.

2. Power on the external BT Device and enter to BT

searching mode. Start pairing following the on screen

instructions from the external BT Device. When paired,

the unit will sound a prompt “Bluetooth connected”