品号：32280107600031 Size: 148.
IMPORTANT SAFETY INSTRUCTIONS FCC Warnings WARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS 3
POWER SOURCE Main Unit: 1. Insert the small plug from the supplied AC/DC Adapter to the DC IN Jack on the rear of unit. 2. Connect the AC/DC Adapter to the wall outlet having AC 100-240V~; 50/60Hz. The Red Standby Indicator on the front of unit will illuminate. To the DC IN jack on the rear of the unit. To the wall outlet DC DC IN 9V,1.5A NOTES: To save energy, unplug the AC/DC Adaptor from the wall outlet if you may not use the unit for an extended period of time.
4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s instructions.) 6. Do not dispose of battery in fire. Battery may explodes or leak. 7. Clean the battery contacts and also those of the device prior to battery installation. 8.
2.1 Mounting to a wooden wall 24. 9 in che s A. Mark the position of the mounting screws on the wall using a pencil (not included). B. Drill the supplied mounting screws directly into the marks that you have made on the wall and leave approx. 0.3 inches length to hook the sound bar. C. Put the sound bar onto the mounting screws. Make sure they are firm and stable. 2.2 Mounting to a brick wall 24. 9 in (1) che s (2) A.
LOCATION OF CONTROLS Front View: 1 2 3 1 Rear View: LINE IN AUX IN L OPTICAL IN DC 6 5 4 R DC IN 9V,1.5A 7 Top View: 8 9 10 1. Speakers 2. Indicators 3. Remote Sensor 4. AUX IN Jack 5. OPTICAL IN Jack 6. LINE IN Jacks 11 7. DC IN Jack 8. STANDBY/SOURCE Button 9. (Play/Pause) Button 10. (Volume Down/Skip Backward) Button 11.
LOCATION OF CONTROLS - REMOTE CONTROL 1 7 2 3 4 5 6 8 9 1. (Standby On/Off) Button 2. (Play/Pause) Button 3. (Skip Backward) Button 4. SOURCE Button 5. VOL- (Volume Down) Button EQ 6. EQ (Equalizer) Button 7. (Mute) Button 8. (Skip Forward) Button 9. VOL+ (Volume Up) Button EFFECTIVE DISTANCE OF REMOTE TRANSMITTER Approx. 16 feet 30° 30° EQ NOTES: When there is an obstacle between the unit and the transmitter, the unit may not operate.
OPERATIONS GENERAL OPERATION: 1. Connected the unit to AC power as previously instructed. The Red Standby Indicator on the front of unit will illuminate. 2. Press the STANDBY/SOURCE Button on the top of unit or press the Control to power on the unit from Standby mode. Button on the Remote 3. Press the STANDBY/SOURCE Button on the top of unit or press the SOURCE Button on the Remote Control repeatedly to switch to desired playback mode.
BT MODE: BT (Bluetooth) pairing: First time use or re-pairing the unit to a new BT Device, pair as follows: 1. Power on the unit and enter to BT mode as previously instructed. The color of the indicator on the front of unit will turn to blue and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. After paired, the blue indicator will stop blinking. 3.
LINE IN: Listen music from RCA output jacks from an external Video/Audio Player such as a Television; DVD Player, VCR …etc. 1. Connect one end of the RCA Connection Cable (included) to the Line Out Jacks on the external Video/Audio Player. 2. Connect the other end of the cable to the LINE IN Jacks on the rear of unit as illustrated below: LINE IN AUX IN L OPTICAL IN White R DC DC IN 9V,1.
AUX IN : Listen music from an external Audio Player such as a MP3 Player, Discman …etc. 1. Connect one end of the Supplied Audio Connection Cable to the Line Out/AUX Out Jack on the external Audio Player. 2. Connect the other end of the cable to the AUX IN Jack on the rear of unit as illustrated below: LINE IN AUX IN OPTICAL IN L R DC DC IN 9V,1.
OPTICAL IN: Listen music from the Optical Out Jack on an external Video Player or Television: 1. Connect one end of the Optical Connection Cable (not included) to the Optical Out Jack on the external Video Player or Television. 2. Connect the other end of the cable to the OPTCAL IN Jack on the rear of unit as illustrated below: LINE IN AUX IN OPTICAL IN L R DC DC IN 9V,1.
CLEANING 1. To prevent fire or shock hazard, disconnect your unit from the AC wall outlet when cleaning. 2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. 3. Mild soap and a damp cloth may be used.
GENERAL SPECIFICATION Power Source...........................................................................................DC 9V, 1.5A, Audio Power..............................................................................5W per Channel (Total 10W, RMS) BT Version...................................................................................................................................5.0 Bluetooth effective working range in open area............................................................
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $10.00 (to cover shipping and handling costs) payable to Craig Electronics Inc.
