Use and Care Manual

This Profiling Toolkit helps to achieve clean
profiles and provides for a permanent seal.
A releasing agent (soapy water) is not needed
to apply the soft caulking mass (silicone).
This process results in better adhesion and
prevents mould from forming underneath. In
the event that the profile application is not
perfect, it is possible to redo isolated parts
without removing the entire profile.
What kind of sealants?
Silicone, acrylic, polyurethane… actually all
sealants may be applied: sealing and flexible
grouts can be made with our tools.
What kind of surfaces?
Tools can be used on all smooth, rough or un-
even surfaces. However, working on extreme
rough surfaces will wear out your tools faster!
How to use:
Choose the caulking line shape from 16 profile
possibilities.
Apply appropriate amount of caulking mass
on a distance of 60-120 cm (it is easier to
work step by step, by only applying material
for short distances). Now make sure that both
smoothing tool edges touch both wall and
floor, slightly press the profiling tool and pull.