Use and Care Manual

Important: Always only use the smooth
edge for spreading.
Regard the
spreading-direction!
Start again behind the position at which you
stopped with a new line section.
Bridging across a vertical grout:
Orange tool with guides: To cross one-sided
grout lines, push the sliding piece diagonally to
the profiling tool into the guides provided.
Blue tool: If you hold the profiling tool at a slight
angle, you cross over the grout-line and doing
so you will keep a uniform grout-pattern profile.
Corners: Start first with the vertical wall-grout
lines and let them bond. After bonding, you
work on the floor-grout starting out of the cor-
ners in both directions.