Use and Care Manual

MADE IN GERMANY
Intersection:
Orange tool with guides: To cross over inter-
secting grout lines, push both sliding pieces
diagonally into the designated guides.
Blue tool: Cover one grout with masking tape.
This way, you can cross over the other one.
Cleaning of tools: Wipe the excess sealant
off with household paper towel. Should this
be forgotten, simply rub the tool across a rub-
ber-like surface.
Removal of old grouts: Remove old caul-
king carefully with a caulking removal knife
with saw blade. Whatever is left on tiles or
other smooth surfaces can be removed with
a scraping blade. On soft surfaces a scraping
blade could scratch, it‘s better to use here a
chemical silicone remover. Important: When
removing old mildew stained grouts or caulks,
wear a protective mask (to avoid the danger
of infection). Use an anti-mildew treatment on
the affected area. Be sure that the surface you
work on is dry and free of oil or grease before
restart caulking.
Made in Germany by:
Cramer GmbH | Salzstr. 8a | 85622 Feldkirchen
Tel. [phone]
www.cramer.gmbh CRA 40405 EN
5 forming tools + guiding aid,
16 profile shapes.
No soapy water required!
Silicone
Profiling
Kit 5