User's Manual

HDC II Programming Guide Monetary Setup
July, 2003 12 6730018
SET TALKER MODE
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press , then until the display shows or
3. Press to turn the talker option ON or OFF.
NOTE
Talker hardware must be installed for this to work.
4. CONTINUE.
SELECT DISPLAY LANGUAGE
1. Press . The current LANGUAGE displays. Press to
choose the desired language. Your choices are:
, , , , ,
, or .
2. CONTINUE.
SELECT COIN MECHANISM
Monetary Setup
1. Press , then press until the current COIN MECHANISM is
shown in the display. Press to choose the desired coin mechanism.
Your choices are:
2. Proceed to SELECT MONETARY OPTIONS, page 15, to customize
your coin mechanism choice.
NOTE
Depending upon your choice of coin mechanisms, some
choices may not display.
3. CONTINUE.