Oven Accessories User Manual

14 4360001

Deli Shop Model 436 Setup Guide

PRICE

Set prices for all the selections in your merchandiser:

1. Press the MODE switch on the main controller.

2. Press until the display shows .

3. Press , and the display shows - - , then .XX. "XX" is the price for door number 1.

4. Press until the selection you want to price is displayed.

5. Enter a new price with the number keys.

6. Repeat steps 4 and 5 until you have priced all the selections.

7. Press to return to the display, or hold to exit.

TEST

View machine status and test certain functions:

1. Press the MODE switch on the main controller.

2. Press until the display shows .

3. Make a selection and open the door (if you deposit money, the credit is shown in the display). The

selection number flashes momentarily in the display to indicate the door solenoid activates. This is

followed by the number with two dashes: Example, - - for selection #1. The dashes indicate that

the door switch is made.

4. Do not close the door yet. You can either wait 12 seconds. The display shows - - , indicating that

the vend timer has timed out. OR, you can press rather than wait the 12 seconds. The display

will still indicate that the machine recognizes that the door has not closed. In this condition, the car-

ousel will not rotate.

5. The display returns to when the door is closed.

6. Repeat steps 3 and 4 for the remaining doors.

7. Press and hold to return to the standby message.

The price display:

--... changes to ... .

Door number Selection price

427P0014