Owner's manual

JUMPER ON = SRC ENABLED
THIS IS THE LOW JITTER MODE
JUMPER OFF = SRC DISABLED
THIS IS THE LOW LATENCY
MODE
JUMPER ON = THE FILTER HAS A SLOW ROLL OFF
JUMPER OFF = THE FILTER HAS A STEEP FAST OFF
This is the A/D convertor upgrade for HEDD-192. The jumper positions that are showen are
the default settings. If low latency is more important than low jitter you will need to change
red jumper to off. The SRC is being used for jitter reduction of externial sources.
jumper options for the D/A converter Rev 5
14