COMPRESSOR LIMITER MANUAL VER 1.1 201200219 2117 E5th street Superior WI USA 54880 davehilldesigns.
Start Up Settings Safety Information Introduction - The Controls LCD Reference Panel Guide (control range) Specifications 2 3 4 7 8 9 SETTINGS TO START WITH THRESHOLD SET AS NEEDED COMPRESSOR DYNAMIC COLOR COLOR (VCA COLOR) SET TO 0 SET TO PWM BYPASS SET TO IN POWER SET TO ON STANDARD CONTROLS SET TO 45 30 30 PARALLEL MIX SET TO COMP MAKE UP GAIN SET TO 0 FAT - AIR SET TO AIR
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions 2. Keep these instructions 3. Heed all warnings 4. Follow all instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth 7. Install in accordance with the manufacturer's instructions 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat 9.
INTRODUCTION Titian is an analog compressor-limiter with a very large range of color and control choices that has reset-ability. The main audio path is digitally controlled analog with discrete class A electronics. The side chain is built with a very high speed dsp that allows the design to push the limits beyond what is possible in the design of an analog side chain.
COMPRESSOR COLOR – (VCA COLOR) The control provides a mix between a very clean PWM gain control device and a vintage gain control element. The vintage gain control element is a diode type compressor circuit designed for a high level of color. There are 16 steps in the cross fade-mix control for a wide range in choices.
STEREO LINK When stereo linked the unit selected as the control master will control all functions on the second channel. The LCD display will show which unit is the control master. When working in stereo all controls on the slave unit are disabled. When switched out / bypassed, Titan is hard bypassed by a relay; this relay will also bypass the unit when power is off. LINK-IN-BYPASS For the Link - In - Out switch to work correctly in the link mode the unit that is to be the slave unit should be set to out.
LCD DISPLAY REFERENCE IN - OUT - LINK STATUS TOP +25DBU THRESHOLD ATTACK RELEASE KNEE SHAPE MAKE UP GAIN KNEE SHAPE GRAPH LCD CLEANING First use care, the best way to clean it is with camera lens cleaning supplies, a micro fiber cloth, an air bulb with a brush. Do not use chemicals, do not touch the surface with you fingers. The surface has a anti glare, anti static coating, chemicals may mess it up.
SHAPE of the Knee Hard ratio =10 to 1 Soft = 1.1 to 1 THRESHOLD COMPRESSOR COLOR (VCA COLOR) PWM 0.018% THD @ +24 dbu VINTAGE 13% THD @ +24dbu ATTACK TIME Fast = 50uS Slow = 400mS DYNAMIC COLOR PARALLEL MIX MAKE UP GAIN 0.5db steps Max Gain = 11.
SPECIFICATIONS Maximum input: +25dbu balanced Maximum output: +25dbu balanced Make Up Gain: 0 to 11.5db, 0.5 steps Noise: -91dbu, 20 KHz BW Frequency Response: 3Hz to175KHz Distortion, clean mode @+25dbu: 0.018% Power: 25 watts at 115 or 230 volts, 50 or 60 Hz. Fuse size is slow acting fuze GMD 0.315A for 115 volts; GMD 0.150A for 230 volts for 100 - 120 volts set to 115V for 220 - 240 volts set to 230v Shipping Weight: 15 lbs (6.7kg) Depth Behind Panel: 8.