Operation Manual

25Start-up
IREGB
or tablet. With automatic data transmission, the blood
pressure monitor will directly switch to transmission
mode once the measurement has been performed (see
chapter “Performing a measurement”).
For manual data transmission, you must switch the
blood pressure monitor to transmission mode yourself
(see chapter “Manual data transfer”).
Memory mode
In memory mode, you can have the measurements
shown on the display of the measurement computer
(see chapter “Viewing the measurements on the meas-
urement computer”) and erase the measurements for a
user (see chapter “Erasing measurements”).
Start-up
Inserting batteries
NOTICE!
Do not use your blood pressure monitor
with rechargeable batteries.
1. Open the battery compartment on the bottom of the
device.
2. Insert the four batteries contained in the product
contents in the battery compartment. In the process,
observe the marking for the correct polarity.