Operation Manual

26 Start-up
GB IRE
3. Close the battery compartment. All indicator segments
will briefly appear on the display
6
(see fig. A and
B). Then the display will switch on and the “24 h” time
format will blink on the display.
The measurement computer is now ready for the basic
settings.
Setting the measurement computer
The results from each successful measurement are
saved together with the time and date. For this, first
the time format, date and time must be entered on the
measurement computer properly. Proceed as follows:
1. If “24 h” blinks on the display, tap the touch buttons
for user 1
10
or user 2
8
to switch between the “12
h” and “24 h” time formats (see fig.A).
2. Push the SET button
7
to save the time format set-
ting. The year indicator will now blink.
3. Tap the touch buttons for user 1 or user2 to set the
current year.
4. Confirm your setting with the “SET” button.
5. You can set the month, day, hours and minutes in
the same manner. Then “On” or “OF” will blink on the
display.
6. Tap the touch buttons for user1 or user 2 to activate
or deactivate Bluetooth® on the measurement com-
puter. Bluetooth® is activated by factory default.
In general, you should only switch Bluetooth® off