Operation Manual

37Handling

IREGB

6. The Bluetooth® symbol

will blink on the display

. The blood pressure monitor will now attempt to

connect to the app for approx. 30 seconds (see fig. A

and B).

7. As soon as a connection has been established,

the Bluetooth® symbol will stop blinking and all

measurements will be automatically transferred

to the app. Following successful transmission, the

Bluetooth® symbol on the display will go out and

the device will switch to sleep mode. If a trans-

mission fails, the display will show the Bluetooth®

symbol and the error code “E7” (see chapter

“Troubleshooting”).

Manual data transfer

NOTICE!

All function buttons on the blood pres-

sure monitor are inactive during the data

transfer.

If it is not possible to automatically transfer the measure-

ments to your smartphone or tablet after the measure-

ment, you can perform a manual transfer as follows:

1. Activate Bluetooth® on your smartphone or tablet.

2. Open the app.

3. Press and hold the SET button

for three seconds.

The Bluetooth® symbol

will blink on the display