Operation Manual

38 Handling

GB IRE

of the blood pressure monitor and a connect to the

app will be established (see fig.Aand B).

4. As soon as a connection has been established, the

Bluetooth® symbol will stop blinking and all meas-

urements will automatically be transferred to the

app.

Once the transfer is successful, the Bluetooth® sym-

bol on the display will go out. The device will switch

o sleep mode. If it is not possible to perform a trans-

fer, the display will show the Bluetooth® symbol and

the error code “E7” (see chapter

“Troubleshooting”).

Viewing the measurements on the

measurement computer

You can also view the measurements you saved directly

on the measurement computer without a smartphone

or tablet. Proceed as follows to do so:

1. Activate the user touch buttons on the

measurement computer with the ON/OFF switch

(see fig. A).

2. Switch to memory mode by touching user 1 touch

button

or user 2 touch button

for approx.

three seconds until the WHO-LED lights up with the

average value for all measurements (see fig. A).

3. You can now browse through the measurements of

the respective user with the user 1 touch button

or user2 touch button

(see fig.A). Tap the re-

spective button once to browse further.