Operation Manual

39Handling

IREGB

The data will be displayed in this order:

• Average values for all measurements

• Average values for the last seven measure-

ments from 05:00 a.m. to 09:00 a.m.

• Average values for the last seven measure-

ments from 06:00 p.m. to 08:00 p.m.

• 60th measurement (last) up to the 1st meas-

urement (oldest)

4. To view the values of the other user, touch the re-

spective user button.

5. After viewing all measurements, the measurement

computer will automatically switch to sleep mode.

If you would like to leave memory mode before this

time, touch the user 1 or user 2 touch button for three

seconds.

Erasing measurements

You can completely erase the measurements of a user.

Proceed as follows to do so:

1. Activate the user buttons on the measurement com-

puter with the ON/OFF switch

(see Fig. A).

2. Switch to memory mode by touching the user 1

button

or user 2 button

for three seconds

until the WHO-LED lights up with the average for all

measurements.

3. Touch the user button of the user whose values you

would like to erase.