Operation Manual

17Setup

USA

In order to calculate your percentage of body fat, body

water, muscle mass, bone mass as well as your BMI, AMR

and BMR, the scale requires individual parameters such

as your gender, height and age. However, it is not possi-

ble to enter these parameters on the scale itself, instead

this must be done with the app or on the Crane website

(see chapter “Creating a user account”).

If these individual parameters are not entered, the re-

sulting measurements may differ considerably from the

actual individual values. Thus, weight will be displayed

without user recognition if the app is not used. We rec-

ommend using the scale in combination with the app.

Setup

Inserting batteries

1. Place the scale on a soft base with the bottom facing up.

2. Open the battery compartment

(see fig.B).

3. Remove the protective foil from the enclosed

batteries

4. Insert the batteries in the battery compartment. The

polarity is correct if the negative poles of the batteries

are lined up with the corresponding spring contacts

in the battery compartment.

5. Close the battery compartment.

6. Turn the scale over.

The reading “0.0” will appear on the display.