Operation Manual

37Troubleshooting
USA
− Take the batteries out of the battery compartment.
− Do not store the scale near heat sources.
− Do not place any heavy objects on the scale if you do
not use the scale.
Troubleshooting
If a malfunction occurs, first check the points below be-
fore you send the scale in to be repaired.
Problem Causes and solutions
The display is
blank.
The batteries were not inserted
correctly.
− Remove the batteries and
insert them again. Make sure
the polarity is correct.
Batteries are empty.
− Replace the empty batteries
with new ones.
“Lo” appears on
the display instead
of the measure-
ments and the
scale immediately
turns off.
The batteries no longer supply a
sufficient amount of power.
− Replace the batteries with
new ones.