Full Product Manual

TECHNICAL SPECIFICATIONS

Maximum Power

1200W

Heat Power Settings

800W / 1200W

Rating Voltage

120 VAC / 60Hz

USER INFORMATION:

CAUTION: DO NOT touch the grill cover during or after operation as it may be hot.

NOTE:

It is normal for the heater to emit some odor when it is turned on for the first time or

after a long period of time not being used. The odor will disappear once the heater

has been running for a short time.

UNPACKING YOUR HEATER

1. Place the heater on a flat, steady, stable, heat-resistant surface.

2. Plug the power cord into a standard 120 VAC electrical outlet.

* The indicator light will show the heater is plugged into a power source.

3. Turn the control knob to either the low or high heat position.

4. Allow the heater to run until the room temperature reaches your desired

comfort level.

SAFETY & OVERHEAT PROTECTION

This heater has protection safeguards to shut the unit off when components

become excessively hot or if the unit tips over.

1. If the heater becomes overheated, it will shut down automatically and the

heater will turn off.

NOTE: The red indicator light will go off; You may smell a slight odor due to the

coils overheating. This is normal and the odor will subside.

2. Remove any nearby objects that may be causing the heater to overheat.

Keep at least three feet of space on all side of the unit to allow adequate air

circulation.

3. Use the heater in a well-ventilated area.

4. Place on a flat, smooth, stable surface.

5. The heater will restart automatically when it has cooled sufficiently.

NOTE: The cool down period could take 30-45 minutes. When the heater is

cooled, the red power light will come back on and heater will begin to emit

heat.