Use and Care Manual

10
TOWER HEATER MAINTENANCE
CAUTION:
Always be sure that the heater is switched OFF, unplugged and completely cooled before
cleaning or attempting to store the item.
1. Always turn off the product and disconnect the cord from the electrical outlet before cleaning
your heater.
2. Light accumulated dust may be removed from the heater with a soft cloth or vacuum cleaner.
3. Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth. DO NOT
use any detergents or abrasives
4. The fan motor is lubricated for life and will not require further lubrication.
AIR FILTER
Dirt and dust may be caught on the air filter during operation. The caught dirt and dust may
negatively affect the function of the device. So clean the filter screen regularly. Remove the
back grill for the inflow of air from back part of the device. Remove the filter screen from the grill.
Wash the filter by hand in a lukewarm solution of water and detergent. Then rinse the filter in
clean water and allow it to dry thoroughly. Place the clean, dry filter back into the back grill and
attach it to the device. Do not use the device without the filter and back grill being installed.
HUMIDIFIER MAINTENANCE
IMPORTANT: Water left in the tank or base when not in use may result in buildup of mineral
deposits and bacteria which may inhibit the output efficiency as well as void the warranty. If
water remains in the Water Tank for more than a day or two, bacterial growth is possible.
DAILY MAINTENANCE
1. Turn off, unplug from outlet and empty water from the tank & base
daily. (To drain the base, place a bowl under the Water Outlet
Cover located below the back grill, and remove plug to release the
water into the bowl.)
2. Allow tank & base to air dry.
3. Leave cap off the tank until ready for next use.
WEEKLY MAINTENANCE
1. Turn off, unplug from outlet and empty water from water tank &
base.
2. Fill the water tank halfway with warm water and add 2 tablespoons of white vinegar.
Shake vigorously and let sit for 30 min. Empty tank and rinse with plain water.
3. Fill base with water and add 2 tablespoons of white vinegar. Let sit
for 30 minutes. Use the brush (1), located inside the unit beneath the
water tank, and clean the nebulizer. To clean the nebulizer, lift the
latch attached to the mist chamber (2).
4. To remove mixture from the basin, place a bowl under the water
outlet cover, located below the back grill, and remove plug. Water
will begin to drain from the basin into the bowl.
5. Allow tank & base to air dry, and leave cap off the tank until next
use.
WHEN STORING THE TOWER HEATER WITH HUMIDIFIER, LET ALL PARTS DRY AND COOL
COMPLETELY BEFORE STORING AWAY IN A COOL, DRY PLACE UNTIL NEXT USE. STORE
THE CORD AWAY FROM METAL OBJECTS.
1
2