About the Crate Acoustic CA60D: D esigned for the performing artist, Crate’s CA60D Acoustic Amplifier gives you more of what you want. More power. More clarity. More control. And, more freedom. Imagine: microphone quality sound, without feedback. And without being “chained” to a mic stand! More power: twin 30-watt RMS power amplifiers drive a pair of specially designed high fidelity 6-1/4” transducers for plenty of volume and low end punch.
Crate Acoustic amplifiers are Made With Pride in the U.S.A. To get this amplifier to sound its best, read this owner’s guide prior to its use. Technical Specifications: Output Power Rating: 60 watts RMS total system power Woofer Amp: 2 x 30 watts RMS @1% THD Inst. Channel: Low: +/-15dB @ 80Hz To keep this amplifier looking its best, avoid abrasive cleansers. Wipe the cabinet clean using a slightly dampened cloth. Never use brass cleaners on the hardware since they could damage their protective coatings.
On the Front Panel: Instrument Active Input Piezo Gain Low Mid High Freq Cut 0 0 0 500Hz -15dB Vocal / Aux Chorus Rev/Eff Send Depth Rate Low-Z Hi-Z Phantom Gain Low High 0 0 Master Rev/Eff Send Mode Rev Return Level Power DLY SPR LAR Shape 0 10 Peak –15 +15 –15 +15 –15 +15 80Hz 4kHz 0 –30dB 0 10 Chorus 0 10 0 Chorus 10 SAR 0 10 –15 +15 –15 +15 0 Multi 10 0 10 0 10 Crate Acoustic CA60D 1 23 4 5 6 7 8 9 10 11 12 13 14 The Instrum
On the Rear Panel: The DSP Section: Effects Loop Line Outputs 0 Foot Switch The CA60D features Crate’s On-Board Digital Signal Processing (DSP) technology that was designed specifically for use with acoustic instruments and vocals. This provides a large selection of digital reverbs, effects and delays. Select the type of effect desired by rotating the Mode control (#23).
www.crateamps.com ©1999 SLM Electronics A Division of St. Louis Music Co. 1400 Ferguson Avenue St.
