About the Crate Acoustic CA125: D microphones, with phantom power on the Low-Z input. The third “Aux” channel allows the use of a rhythm machine, background tape, or another mic or instrument. More power: twin 50-watt RMS power amplifiers drive a pair of specially designed high fidelity 8” low frequency transducers for plenty of volume and low end punch. Still more: The master section features reverb and effects return controls, a five-band graphic EQ, and the master level control.
Crate Acoustic amplifiers are Made With Pride in the U.S.A. To get this amplifier to sound its best, read this owner’s guide prior to its use. Technical Specifications: Output Power Rating: 125 watts RMS total system power Woofer Amp: 2 x 50 watts RMS @1% THD Tweeter Amp: 25 watts RMS @1% THD To keep this amplifier looking its best, avoid abrasive cleansers. Wipe the cabinet clean using a slightly dampened cloth. Never use brass cleaners on the hardware since they could damage their protective coatings.
On the Front Panel: 1 2 3 4 5 6 7 Low Mid 0 0 8 9 10 11 High Freq Cut Rev/Eff Send 0 500Hz –15dB Instrument Gain Input Contour 175 12 13 14 Chorus Depth Master Rate 1.2k Graphic Eq On Piezo Power +12dB 0 10 –15 +15 –15 +15 500Hz 1.
On the Rear Panel: 34 33 32 Tweeter 31 30 29 28 27 33: Line Out Level. Use this control to adjust the output level of the line out signal. (This control works independently from the amplifier’s master level control.) 34: Tweeter Level. Use this control to adust the signal output level from the CA125’s internal tweeter. Rotating this control counter-clockwise reduces the tweeter’s output level. Not Shown: Power cord. Connect the end of this cord to a suitable source of line voltage.
www.crateamps.com ©1999 SLM Electronics A Division of St. Louis Music Co. 1400 Ferguson Avenue St.