Assembly Instruction

HARDWARE

1 With the assistance of another adult, place table top

upside down on a padded surface. Insert bolts of 4 legs

through holes in corner blocks as shown. Attach each leg

with 2 hex nuts, 2 split washers and 2 flat washers.

Fully tighten each hex nut with the hex wrench.

Thank you for purchasing the Kipling Extension

Dining Table. This page lists all the contents included

in the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

4 - legs

1 - table top

TOOLS REQUIRED

Hex Wrench (included)

1 - leaf

KIPLING EXTENSION DINING TABLE

Page 1 of 2

Made in Indonesia - r06

Missing hardware? Please call 800.606.6387 for

replacements.

8 - hex nuts 8 - split washers

8 - flat washers

PAGE 1
KIPLING EXTENSION DINING TABLE HARDWARE 8 - hex nuts 8 - split washers 8 - flat washers Thank you for purchasing the Kipling Extension Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
KIPLING EXTENSION DINING TABLE EXTENSION LEAF INSTALLATION buckle triangle buckle hook OPEN & UNLOCKED POSITION 2 Place table upright and locate 4 locking clasps underneath tabletop. To unlock, lift buckle up as shown and release the triangle buckle from the hook. This will release the tabletop sections. With the assistance of another adult, pull 2 tabletop sections apart. Place leaf into position, aligning metal pins on leaf with matching locator holes. Push both tabletops towards the center.