Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott 44" Corner Media Console

COMPONENTS

Made in China - r07 Page 1 of 5

Thank you for purchasing the Abbott Corner Media

Stand. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT CORNER MEDIA STAND

1 - front frame1 - top panel

2 - side panels

(1 left, 1 right)

1 - back panel

2 - corner

back panels

ASSEMBLY HARDWARE

TOOLS REQUIRED

14 - small

screws

11 - bolts 19 - wood

dowels

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

1 - bottom

panel

23 - large

screws

1 - partition 2 - adjustable

shelves

1 - leg

4 - cam

screws

4 - cams

8 - shelf

pins

Missing hardware?

Please call 800.606.6387

for replacements.

WALL MOUNTING HARDWARE

1 - wall

strap

1 - wall

screw

4 - cam

covers

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
ABBOTT CORNER MEDIA STAND ASSEMBLY HARDWARE 14 - small screws 4 - cams 23 - large screws 8 - shelf pins 11 - bolts 4 - cam covers 19 - wood dowels 4 - cam screws Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Abbott Corner Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT CORNER MEDIA STAND NOTE: Do not over tighten the cam screws partition A front frame left and right side panel 1 Carefully place front frame onto a clean, padded surface. Insert 11 wood dowels and 4 cam screws into front frame as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. NOTE: Make sure arrows on each cam point toward nearest edge with holes B 2 A) Insert 6 wood dowels into partition as shown.
PAGE 3
ABBOTT CORNER MEDIA STAND left side panel front frame 5 With the assistance of another adult, position unit as shown. Attach left and right side panels to assembled unit with 4 large screws, using a screwdriver. 6 With the assisntace of another adult, place front frame face down as shown. With the assistance of another adult, fit dowels of front frame into corresponding holes of assembled unit as shown.
PAGE 4
ABBOTT CORNER MEDIA STAND corner back panel back panel B corner back panel B A NOTE: Make sure holes of side panels are positioned as shown 9 Attach back panel to assembled unit with 3 large screws as shown. Secure using a screwdriver. 10 A) Fit 2 corner back panels into corresponding groove of left and right side panels as shown. B) Secure each corner panel to assembled unit with 5 small screws using a screwdriver. 11 A) Place asembled unit upright.
PAGE 5
ABBOTT CORNER MEDIA STAND shelf pin A A B A corner back panel back panel B adjustable shelf 12 A) Insert 8 shelf pins into assembled unit at desired shelf heights. B) Place 2 adjustable shelves onto shelf pins as shown. Make sure shelves are securely supported by each shelf pin. C) At this point, cover all exposed cams with cam covers. corner back panel 13 A) Secure corner back panels to top panel with 4 small screws as shown. B) Secure back panel to top panel with 4 large screws as shown.