Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott 52" Media Console with Doors

COMPONENTS

Made in China - r07 Page 1 of 5

Thank you for purchasing the Abbott 52” Media Stand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT 52” MEDIA STAND

2 - door fronts

1 - top panel

2 - side panels

(1 left, 1 right)

1 - back panel

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for

replacements.

16 - small

screws

15 - bolts 12 - wood

dowels

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

1 - bottom

panel

1 - partition2 - adjustable

shelves

1 - leg

4 - door

hinges

4 - side panel

hinges

18 - large

screws

WALL MOUNTING HARDWARE

1 - wall strap

8 - shelf

pins

1 - small

wall screw

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
ABBOTT 52” MEDIA STAND ASSEMBLY HARDWARE 16 - small screws 4 - door hinges 18 - large screws 15 - bolts 4 - side panel hinges 8 - shelf pins 12 - wood dowels Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Abbott 52” Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT 52” MEDIA STAND A top panel left and right side panel B bottom panel 1 Insert 2 wood dowels into left and right side panels as shown. 2 A) Insert 6 wood dowels into top panel as shown. B) Insert 2 wood dowels into bottom panel as shown. NOTE: Do not over tighten the screws NOTE: Do not over tighten the bolts bottom panel right side panel partition left side panel 3 Fit dowels of bottom panel into corresponding holes of partition as shown.
PAGE 3
ABBOTT 52” MEDIA STAND A back panel A top panel B leg 5 A) Fit dowels of top panel into corresponding holes of partition and left/right side panels as shown. Secure with 9 bolts using a phillips head screwdriver. B) Attach leg to bottom panel of assembly. Turn leg clockwise to secure. 6 Attach back panel to assembled unit with 14 large screws as shown. side panel hinge door hinge left and right door fronts 7 With the assistance of another adult, position unit upright.
PAGE 4
ABBOTT NOTE: If doors are not aligned, see Hinge Adjustment Instructions 52” MEDIA STAND A right door front shelf pin A pre-installed screw B left door front adjustable shelf adjustable shelf 9 Attach 2 door hinges of left and right door fronts to corresponding 2 side panel hinges of left and right side panels as shown. Secure hinges with pre-installed screw using a screwdriver. 10 A) Insert 8 shelf pins at desired shelf heights as shown. B) Place 2 adjustable shelves onto shelf pins.
PAGE 5
ABBOTT 52” MEDIA STAND HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A. 2) Depth adjustment: Loosen screw A, push hinge arm forwards or backwards, re-tighten screw A and secure screw B with a 1/4 turn clockwise. A 3) Height adjustment: Loosen screw C, adjust door height and retighten screw C.