Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott 65" Media Console

COMPONENTS

Made in China - r03 Page 1 of 6

Thank you for purchasing the Abbott 65” Media Stand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT 65” MEDIA STAND

2 - partitions

(1 left, 1 right)

1 - top panel

2 - side panels

(1 left, 1 right)

2 - door fronts

(1 left, 1 right)

1 - back panel

Missing hardware? Please call 800.606.6387 for replacements.

18 - bolts 8 - shelf pins16 - wood

dowels

1 - bottom panel

52 - large

screws

2 - drawer bottoms 4 - drawer sides

(2 left, 2 right)

2 - drawer backs 2 - drawer fronts

2 - support

legs

2 - adjustable

shelves

4 - door

hinges

4 - panel

hinges

16 - small

screws

ASSEMBLY HARDWARE

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

WALL MOUNTING HARDWARE

1 - wall strap 1 - small wall screw

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (6 pages)

PAGE 1
ABBOTT 65” MEDIA STAND ASSEMBLY HARDWARE 16 - wood dowels 52 - large screws 18 - bolts 4 - door hinges 4 - panel hinges 16 - small screws 8 - shelf pins WALL MOUNTING HARDWARE Thank you for purchasing the Abbott 65” Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ABBOTT 65” MEDIA STAND left partition bottom panel right partition A bottom panel NOTE: Do not over tighten the screws left partition B right partition NOTE: Make sure pre-installed door stops of left and right partitions are assembled towards the front of assembly as shown 1 A) Insert 4 wood dowels into bottom panel as shown. B) Fit dowels of bottom panel into corresponding holes of left and right partitions as shown.
PAGE 3
ABBOTT 65” MEDIA STAND support leg top panel 5 Position assembly as shown. Attach 2 support legs to bottom panel of assembly as shown. Turn each leg clockwise to secure. 6 Insert 8 wood dowels into top panel as shown. left side panel B B top panel A right side panel Made in China - r03 7 A) Fit dowels of top panel into corresponding holes of side panels and partitions as shown. B) Attach each side panel and partition to top panel with 3 bolts as shown. Customer Service 800.967.
PAGE 4
ABBOTT 65” MEDIA STAND back panel 8 Attach back panel with 20 large screws as shown, using a screwdriver. 9 With assistance of another adult, position unit upright. Attach 2 panel hinges to left and right side panels with 2 small screws.
PAGE 5
ABBOTT 65” MEDIA STAND A right drawer side drawer front A A drawer bottom drawer back B adjustable shelf 12 A) Insert 8 shelf pins at desired shelf heights. B) Place 2 adjustable shelves onto shelf pins. Make sure shelves are securely supported by each shelf pin. left drawer glide B left drawer side 13 A) Attach right drawer side to drawer front with 3 large screws, using a screwdriver. B) Attach drawer back to right drawer side with 3 large screws.
PAGE 6
ABBOTT 65” MEDIA STAND OPTIONAL SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. NOTE: Insert screws 3/4"-1" from the edge of the strap WALL small wall screw wall strap A. Insert large wall screw (not included) through end of wall strap and into wall as shown. B.